1. The cooling effect is good. The cooling air and the granular materials move in opposite directions, so that the materials are gradually cooled from bottom to top and reduce particle cracks;
2. After cooling, the material temperature should not be higher than room temperature +5℃, and the precipitation rate should not be less than 2%, extending the storage time of the particles;
3. The unloading device adopts impeller unloader;
4. It can automatically clean materials to avoid cross-contamination;
5. Automatic temperature monitoring at four corners, which can be automatically controlled by frequency conversion with the cooling fan;
6. For widths above 2400mm, an electric distributor and flattening device can be optional;
7. Widely suitable for cooling of various granular materials.
| Model | SKLYF15×15 | SKLYF20×20 | SKLYF24×24 | SKLYF28×28 |
| Capacity(t/h) | 5 | 10 | 15 | 30 |
| Cooling time(min) | 8~15minutes | |||
| Temperaturet cooling(℃） | ≤Room temperature+5℃ | |||
| Power(kw) | 1.5 | 2.2 | 3.0 | 5.5 |
| Fan pressure(Pa) | 2000 | 2000 | 2000 | 2000 |
| Fan type | 4-72-11NO-5A/7.5kw | 4-72-11NO-6C/15kw | 4-72-11NO-8C/30kw | 4-72-11NO-10C/37kw |
English
Chinese
