1. Faster heating speed and higher temperature. Short startup preheating time and high preheating temperature; equipped with a float trap with built-in air exhaust function to further improve the heating efficiency when startup; conical top cover design, Effectively promotes the recovery of condensed water from the top cover and improves heating efficiency.
2. A large-section turning plate mechanism is used to ensure the uniformity of material discharging at various positions in the warehouse and avoid burning material due to local poor discharging.
3. The hopper is equipped with a heating coil and insulation. A heating pipe is installed in the interlayer of the hopper to heat the air in the hopper, prevent condensation water from appearing in the hopper, reduce wall-hanging residue in the hopper, and also help stabilize the warehouse preheating.
4. Faster heat dissipation. After shutdown, open the double access door on the stable warehouse to promote air convection and speed up the heat dissipation of the equipment.
5. More convenient cleaning and maintenance. The flap shaft head is equipped with steps that can be clamped by wrenches and pipe wrenches to facilitate the adjustment of the flap angle (backup).
| Model | MFSH15×15 | MFSH20×20 | MFSH24×24 | MFSH28×28 |
| Yield
Capacity(t/h) |
1-2 | 2-3 | 5 | 8 |
| Stable schedule
cooling time(min) |
>60minutes | |||
| Temperature after cooling
Temperaturet cooling(℃） |
≤room temperature+5℃ | |||
| Power
power(kw) |
1.5 | 2.2 | 3.0 | 5.5 |
English
Chinese
