This process can produce various puffed aquatic feeds. The ring die aperture is 0.8-8mm and the output is 1-15T/H. The production process is various raw material feeding-ingredient mixing-primary crushing-ultrafine crushing-secondary batching mixing- Puffing-drying-screening-vacuum spraying-cooling-screening-packaging.
Technical Parameters
| Name | Total power | Capacity | Compressed air | Air compressor | Amount of steam (steam drying) | Boiler (steam drying) | Steam volume (gas drying) | Boiler (gas drying) |
| 1T/H parameter | 386KW | 1T/H | 2.4 cubic meters/minute | 15KW | 0.7T/H | 1 ton | 0.7T/H | 1 ton |
| 2-3T/H parameter | 538KW | 2-3T/H | 2.4 cubic meters/minute | 15KW | 1.05T/H | 1.5 ton | 0.3T/H | 0.5 ton |
| 5-7T/H parameter | 680KW | 5-7T/H | 3.6 cubic meters/minute | 22KW | 2.4T/H | 3 ton | 0.7T/H | 1 ton |
| 10T/H parameter | 1350KW | 10T/H | 3.6 cubic meters/minute | 22KW | 3.5T/H | 4 ton | 1.4T/H | 2 ton |
| 15T/H parameter | 1800KW | 15T/H | 7.5 cubic meters/minute | 45KW | 5T/H | 6 ton | 1.2T/H | 2 ton |
This process can produce various fish baits, with a mold aperture of 0.3-0.8mm and an output of 200-500T/H. The production process is feeding – batching mixing – primary crushing – ultrafine crushing – secondary batching – mixing – high imitation screening – puffing -Drying-screening-spraying-cooling-screening-packaging. The fineness of the ultrafine powder needs to reach 99% and over 100 mesh, and the dryer and cooler are special equipment.
Technical Parameters
| Name | Total power | Capacity | Compressed air | Air compressor | Steam volume | Boiler |
| Parameter | 185KW | 200-500kg/H | 2.4 cubic meters/minute | 15KW | 0.2-0.3T/H | 0.5 ton |
This process can produce various shrimp feeds. The ring die aperture is 1.0-2.0mm, and the single-line output is 1-5T/H. The production process is various raw material feeding-ingredient mixing-primary crushing-ultrafine crushing-secondary batching mixing. -Granulation-ripening-cooling-crushing-screening-packaging.
Features：
1: The crushing fineness requirement is very fine, 95% passes 80 mesh;
2: High ripening requirements: the conditioner must be equipped with four layers, namely differential conditioner + quality preserver + quality preserver + single-axis conditioner
3: It needs to be post-cured and simmered in a post-curing device for more than 60 minutes after granulation to improve water resistance;
4: The crushed materials need to use a fine-toothed crusher, and a powder cleaner is required before packaging the finished product to ensure that the powder content of the finished product is less than three thousandths.
English
Chinese
